Stripper System - Breakers - BEBL
These settings define the shape and size of Back Edge Breaker Large (BEBL) breaker restrictions.
Height
This is the height of the nose/lug restriction.
Top width
This is the width of the top of the nose/lug restriction.
If materials have been defined, material specific overrides can be made for this value by clicking the 
Material button.
Base width
This is the width of the base of the nose/lug restriction.
If materials have been defined, material specific overrides can be made for this value by clicking the 
Material button.
Male Component
Offset
This is the distance between the restriction and the anchor for any dynamic stripping component placed relative to it.
If materials have been defined, material specific overrides can be made for this value by clicking the 
Material button.
Edge distance
This is the distance between the base and the anchor for any dynamic stripping component placed relative to it.
If materials have been defined, material specific overrides can be made for this value by clicking the 
Material button.
Ruled Part
If this option is checked, the entities will be added to the female to insert a riding knife.
Dist 1
This is the length of the first entity (in line with the breaker) in the ruled part.
Dist 2
This is the length of the second entity in the ruled part.
Angle
This is the angle of the second entity in the ruled part relative to the first.
Palette
This is the palette to use for the ruled part.