Symbol Patterns

This page allows standard symbol patterns to be added to one of the stripper units. This can be used to add standard text or location holes, for example.

Stripper Machine Settings - Symbol Patterns

Type

Male, Female or Front Edge; from the pulldown list select the unit the symbol patterns are to be applied to.

Add

This will open the Pattern Attributes form to select a new pattern to add for the current unit type.

Change

This will open the Pattern Attributes form to change the settings of the highlighted pattern for the current unit type.

Delete

This will delete the highlighted pattern for the current unit type.

Place into a new block

This option determines if the symbol patterns should be placed into a block of the specified Block name.

Special output block

This option determines if the symbols will be optimised with any one-up designs when output.

Place each symbol pattern into a new sub block

This option determines if each individual symbol pattern should be placed into a new sub block within the symbol pattern block.

Include laser offsets in wood extents

If this option is not checked, then any symbol pattern which uses symbols that are positioned by wood will not include the beam width in the calculation for the extents of the wood.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.

You may like to read -