This tab allows some advanced properties of selected entities (many of which are related to die-making) to be modified. The page is displayed whenever one or more geometric entities are selected (Arcs, Beziers and Lines). Unavailable options are displayed in Red.
Entity Inspector - Advanced
Rule Height
Enter the required rule height.
Bevel Side
From the drop-down list select either Left or Right. This option is only available if none of the selected entities are specified as centre bevel.
Rule Type Side
From the drop-down list select either Left or Right. This option is only available if all of the selected entities are Cascade, Wave, Zigzag or Zipper type entities.
Holding Bridge
From the drop-down list select Left, Right or Both. This option is only available if all of the selected entities have holding bridges.
Combo Main Palette
From the drop-down list select the required palette. This option is only available if all of the selected entities have a combination palette assigned to them.
Combo End Mode
From the drop-down list select either Main at start or Main at centre. This option is only available if all of the selected entities have a combination palette assigned to them.
Lock Direction
From the drop-down list select either Locked or Unlocked.
Palette Text
From the drop-down list select either Display or Hide.
Secondary Palette
From the drop-down list select the required palette. Press the Clear button to remove the Secondary Palette.
Channel Offset With
Enter the required value for the channel offset with the grain.
Channel Offset Against
Enter the required value for the channel offset against the grain.
Clear
Press this button the remove the two channel offset values.